The A-Line skirt has been around forever. It's simple design has not changed over the years, other than the length of the hemline. I remember making this skirt when I first learned to sew - didn't everyone? It's basically 4 pieces - a front section cut on the fold, two back pieces with a seam and a waistband (or not). It may be cut on the bias or the straight of the fabric and it may or may not have darts at the waist.
We decided to make up
Burda's 8281 in two different fabrics -
corduroy and
denim. Both fabrics will be great for the transition into Spring. I'm not much into bold plaids, but as you can see, it would be easy to duplicate the look on the pattern cover with some of our
great woolens!
For my corduroy skirt, we decided to cut the skirt on the straight grain of the fabric. This
soft corduroy has a distinctive nap. A fabric with nap is one what usually has a pile and will look different shades from different angles. Velvet and velour fabric are prime examples of fabric with nap along with our pin wale corduroy.
To determine the direction of the nap, lay the fabric up against your body and run you hand downward on the fabric. The nap of the corduroy should be smooth as your hand moves downward on the fabric.
This is the direction that you will lay out your pattern pieces, both skirt front and skirt back, meaning that the waist of the front should be the same as the waist of the back (think of it in terms of a top of the fabric and a bottom). When cutting out fabric, the "with nap" and the "without nap" directions are usually different to allow all of the with nap pattern pieces to lie in the same direction.
Corduroy can ravel and fuzz up, so Laurel serged the seam edges. You could also use a "Hong Kong" binding finish or flat-felt seams if you felt especially ambitious (curious about to finish your seams with something besides a serger? Take a look at our
Perfect Seams class).
For the denim skirt, we chose a
lighter weight 6.5 oz denim and decided to cut the pieces on the
BIAS for added interest. A bias cut just means that the fabric pieces of a garment are shifted to a 45 degree against the lengthwise grain. Making this shift usually means that you will need more fabric than the pattern calls for, but how much?
Karen (one of our customers) writes:
"If I want to make a dress or skirt and I want the fabric to be cut on the bias instead of with the grain then how much extra fabric do I need? Is there a certain percentage more that is standard? like add 30% more to the yardage the pattern calls for if I'm cutting on the bias?"
This is a great question with a not so easy answer. I asked two of my sewist friends if they had a tried and true rule, and both came back with similar answers. To put it simply, how much more fabric you need for a bias cut
depends on the width of the fabric and style of the pattern.
For instance a short A-line skirt such as the denim skirt Laurel made requires less additional fabric to cut on the bias
because the pattern is short ( only 20"). On the other hand, a longer skirt such as the ponte knit maxi skit we made last summer would probably need 50% more fabric to cut it on the bias.
Laurel is planning to make a knit maxi skirt with a Chevron striped pattern similar to this Calvin Klein knit skirt, so matching the striped pattern will probably necessitate twice as much fabric as the pattern dictates. The simplest solution is to make a muslin (there we go with that "make a muslin" suggestion again!) of the pattern.
Remember the
silk charmeuse blouse? Laurel made a muslin pattern to lay on bias of the silk to determine the best use of the fabric's lovely print. If you're making a skirt with a center fold, like this blouse, then cut out the entire front panel in muslin (on the fold), open the piece up and use it to lay on your chosen fashion fabric. Most bias pieces are cut in a single layer, due to the width of most fabric is not wide enough to have a fold on the bias AND fit a skirt or blouse front pattern piece.
For most bias cut garments, it is okay to alternate the bias, putting the grain-line on the cross or the lengthwise. With our denim skirt, the weave is a twill, so because there is a perceptible nap to it, it's still best to cut it out with the waist part of the garment at one end (the "top" of the fabric) to keep the nap similar.
Very little finishing is needed for this bias fabric, so Laurel was able to complete this A-Line skirt in a little over an hour. A simple zipper, narrow waistband and a machine finished hem completed my casual
denim skirt. Both looks are going to be great with boots and/or tights! Do you want to make a perfect basic skirt for your wardrobe? We have a class for that! Our
Perfect Pencil Skirt class shows you how to cut and fit the right skirt for you.
Laurel will be coming by this week with the finished skirts and we'll do another photo shoot to show off our success! Be sure to share YOUR successes (and even your failures) with us! We are all inspired and learn from one another. I love seeing what you are working on for Spring. Email me at
fabriclady3@gmail.com with your sewing blogs, photos or words of wisdom!
Creatively yours,
SuZan
a.k.a. Daughter!
p.s. we are getting ready to celebrate 33 years in Berkeley!!!
Do you already receive our newsletters and postcards with discounts on them?
If not, please let me know and I will be happy to add you to our list of all-star customers!
